DIN 60WCrBV7 Low Alloy Tool Steel Plate

Model Number: ZXL116 Brand Name: Baosteel, TISCO Key Specifications/Special Features: Descriptions:This steel is one of shock resisting tool steel types with very good toughness in combination with high hardenability, Impact-resistant, tungsten-alloyed cold-work toolApplications:For cutting tools (dies, punchers) for plate, woodworking tools, blanking dies for cutting sheet metals up to 12mm thickness, trimming and splittingdies, cold piercing punches, performing punches, shear blades, chipping knives, pneumatic chisels, coining tools, cold shear blades and ejectorsChemical Composition (in weight %):C: 0.60
Si: 0.85
Mn: 0.30
Cr: 1.05
V: 0.15
W: 1.45
Physical properties (averagevalues) at ambient temperature:
Modulus of elasticity [10³xN/mm²]: 190-210
Density [g/cm³]: 7.93
Thermal conductivity [W/m. K]: 25.0
Electric resistivity [Ohm mm²/m]: 0.30
Specific heat capacity [J/g. K]: 0.46
Soft Annealing:
Heat to 710-750°C, cool slowly in furnace
This will produce a maximum Brinell hardness of 225
Stress Relieving:
Stress relieving to remove machining stresses should be carried out by heating to 650°C, holding for 1-2 hours at heat, followed by air cooling
This operation is performed to reduce distortion during heat treatment
Hardening:
Harden froma temperature of 860-900℃, followed by oil or hot bath (180-220°C) quenching
Hardness after quenching is 60 HRC
Forging:
Hot forming temperature: 1050-900°C
Corrosion Resistance:
Corrosion resistance of this alloy is better than that of plain carbon steels, however it will rust unless given protective treatment

Specifications:
Grade: DIN 60WCrV7
Standards: DIN, GB, AISI
Length: 1500-6000mm
Width: 100-1250mm
Thickness: 0.3-200mm
Certification: ISO
Technical treatment: cold-rolled and hot rolled

Packing and delivery:
Packing: standard export seaworthy packing or as customers’requirements
Delivery: 7-20 days after received deposit of T/T